BTR 6.4 HEMI VVT 224 CAMSHAFT

224/24X .611"/.609" 111.5 LSA

INTAKE LOBE LIFT @ TDC: 0.0659

Brian Tooley Racing proudly unveils the latest breakthrough in the dynamic world of the Gen III HEMI. Our Gen III HEMI camshafts stand as a testament to our commitment to innovation, crafted in response to the evolving landscape of high-performance demands. Whether you're conquering rugged terrains in a Ram truck or unleashing power on the streets in a Charger or Challenger, our meticulously curated Gen III 6.4 HEMI cam lineup is poised to meet and exceed your every need.

Elevate your engine's performance with our 224 Hemi Camshaft. Meticulously crafted in-house, we design and develop the lobes with a delicate balance of performance and stability in mind. Rigorous spintron and dyno testing validate its superior performance and durability, making it the choice for enthusiasts seeking a noticeable upgrade.

BTR 6.4 HEMI VVT 224 CAMSHAFT 224/24X .611"/.609" 111.5 LSA 570+ HP at the crank of your 6.4L Hemi is what you can expect with our 224 camshaft. The 224 grind provides additional horsepower and torque throughout the entire operating range while maintaining good drivability. On the BTR Dyno, we observed gains starting at 2200 RPM, with a peak gain of 50 HP at 6600 rpm and 40 lb/ft at 6400 RPM. The 224 continues to pull strong up to 6800 RPM! STOCK CONVERTER FRIENDLY! 

Engine Family:    GEN III 2009 + 6.4Ltr HEMI APPLICATIONS

Recommended Valve Springs: SK024  

Valve Tip Saver: HEMILC-16  

Lifters REQUIRED:   Non-MDS (MDS Conversion required)  

• Intake Valve Lift:    .611
• Exhaust Valve Lift:   .609
• Lobe Separation Angle: 111.5
• Intake Lobe Lift:    .370
• Exhaust Lobe Lift:   .369
• Intake Lobe Lift @ TDC   0.0659
• RPM Operating Range:    2000-6800
• Idle Quality:     Aggressive Sound
• Chop Scale:     7/10

Expected Cam Swap Gains:  50 Horsepower, 40 Ft/lbs, extra 500 RPM of operating range

Torque Converter Characteristics:  Can work with the OEM torque converter although we recommend the use of an aftermarket converter for best performance.    

Made in the USA!

FOR FASTENER TORQUE SPECS, DIAGRAMS, AND OTHER TECHNICAL INFO, VISIT: BRIANTOOLEYRACING.COM/TECHNICAL

CAM SPEC CARD DOWNLOAD LINK

NOTE: The use of a BTR aftermarket spring kit is required due to high valve lift and increased rpm potential in combination with the heavy OEM valves. We also recommend the use of hardened pushrods in power adder applications.

NOTE: To take advantage of this grind, a proper calibration with attention to detail will make this camshaft SHINE!

NOTE: The 224 Camshaft requires a VVT Limiter to be installed in your cam phaser. This limiter is included in the camshaft box, so there is no need to purchase it separately.

However, if you do not already have the required installation tool, we offer a hire option. A $100 deposit is required, which will be refunded upon the tool’s return. You can select this option in the OPTION BOX.

The tool must be returned within 2 weeks, or the deposit will be forfeited.

The dyno test below was conducted on a stock 6.4 with a truck intake, valve spring upgrade, E85, and long-tube headers. Stock cam VS. our 224 cam.