The Aeroflow Performance turbo bag / blanket range provides high quality material selection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat produced by your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartment such as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-temp Silica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.

Specifically designed to suit Ford XR6 BA/BF/FG with the turbo Barra engine using the factory turbocharger. Will also suit most GT30/GT35 frame turbochargers using a internal wastegate actuator.

The internal rating of these bags is up to 1370°C (2500°F).

The external rating of these bags is up to 1370°C (2500°F).

Note: When installing Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.

Our Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquids such as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. Aeroflow Performance are not responsible for any fire related damage caused by flammable liquid contamination.